Project carts is empty
ZONE4 4-Zone Stereo Pre-Amplifier, 20Hz to 30kHz Frequency
Please sign in so that we can notify you about a reply
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. These control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
Brand:
Biamp
Specifications
Product Type:
4-Zone Stereo Pre-Amplifier
Special Features:
The Possibility to Assign 3 Microphones, Remote Control Panels
Includes:
Removable Metal Cover
Performance
Signal-to-Noise Ratio:
>90dB
Frequency Rating:
20Hz to 30kHz
Total Harmonic Distortion:
<0.02%
Inputs and Ports
Connector Type:
RS-232
Power
Input Voltage:
115 to 230V AC
Dimensions
Width:
48.3cm
Depth:
36.1cm
Height:
4.4cm
Weight:
11.9kg
No reviews found