Sound Masking & Paging

P9HW=
The P9HW is a wired, two-channel stereo personal monitor with individual mix controls. It delivers improved audio clarity and reduced feedback onstage versus traditional speaker wedges. Listen to one or two channels of audio from the mixing console through earphones, using MixMode technology to...
BrandShure Product TypeBodypack Personal Monitor
Available : Backorder
Add to cart
PAGENETDN
PAGENETDN is a programmable Paging Station with dual audio output: DANTE™/AES67 (digital) and analogue (balanced). This way, its control features and its microphone signal can be used for paging together with any EclerNet digital matrix, no matter whether it supports DANTE™/AES67 or not:...
BrandEcler Product TypeProgrammable Paging Station with Control Touch-Screen
Available : Backorder
Add to cart
PS-1600G
Features Capacitive touch, programmable keypad and 240 x 64 graphics LCD for flexible customization Fully compatible with all Q-SYS systems. Simply connect to a Q-SYS system (with version 2.0 software or later) and all paging functions are available without the need for additional hardware...
BrandQSC Systems Product TypePage Station
Available : Backorder
Add to cart
PS-1600H
Features Capacitive touch, programmable keypad and 240 x 64 graphics LCD for flexible customization Fully compatible with all Q-SYS systems. Simply connect to a Q-SYS system (with version 2.0 software or later) and all paging functions are available without the need for additional hardware...
BrandQSC Systems Product TypePage Station
Available : Backorder
Add to cart
PS-1650G
Features Capacitive touch, programmable keypad and 240 x 64 graphics LCD for flexible customization Fully compatible with all Q-SYS systems. Simply connect to a Q-SYS system (with version 2.0 software or later) and all paging functions are available without the need for additional hardware...
BrandQSC Systems Product TypePage Station
Available : Backorder
Add to cart
PS-1650H
Features Capacitive touch, programmable keypad and 240 x 64 graphics LCD for flexible customization Fully compatible with all Q-SYS systems. Simply connect to a Q-SYS system (with version 2.0 software or later) and all paging functions are available without the need for additional hardware...
BrandQSC Systems Product TypePage Station
Available : Backorder
Add to cart
PS-ACC
BrandQSC Systems Product TypeMounting Flange Accessory
Available : Backorder
Add to cart
PS-X
Features Fully compatible with all Q-SYS page station models Connects directly to page station simplifying installation Emergency paging priority over-ride Rugged, handheld PTT (Push To Talk) microphone with convenient magnetic mount included
BrandQSC Systems Product TypePage Station Expander
Available : Backorder
Add to cart
SLM200
With the SLM200 we developed a stable, safe and reliable way to measure environmental noise levels. This compact digital sound meter has been perfected to achieve highly accurate measurements in a cost-effective, tightly packed measuring instrument. We envisioned a clever and ergonomic tool,...
BrandAudac Product TypeMini Sound Levelm
4640 MSRP
Available : Backorder
Add to Project Add to cart
SLM700
The SLM700 is a stable, safe and reliable sound level meter, designed for all kinds of sound level measurements and compliant to all international standards for sound level meters. It can be switched between two different weighting frequency filters (A and C type) and has a fast (peak value, 125...
BrandAudac Product TypeSound Levelm
19080 MSRP
Available : Backorder
Add to Project Add to cart
TSD-GPN1200
The AtlasIED TSD-GPN1200 sound masking generator is perfectly suited for basic sound masking systems. The analog topology design eliminates repeating cycles commonly found in other manufactures low cost digital designs.The TSD-GPN1200 allows selection between pink or white noise sources and...
BrandAtlas IED Product TypeSound Masking Generator
32430 MSRP
Available : Backorder
Add to Project Add to cart
unDNEMO
The Attero Tech unDNEMO Dante network audio monitor offers a simple solution for selection and monitoring of up to 64 Dante network audio channels via headphones or the device’s internal loudspeakers. Additionally, the built-in microphone and USB connector enable the unDNEMO to be used as a...
BrandQSC Systems Product TypeNetwork Audio Monitor
Available : Backorder
Add to cart
Vocia ANC-1
The ANC-1 allows the Vocia® system to adjust output levels automatically in response to changes in ambient noise levels. The ANC-1 is a networked device for use with Biamp’s Vocia amplifiers. It accepts two ambient noise inputs at microphone or line level. Most high-quality dynamic and condenser...
BrandBiamp Product TypeAmbient Noise Compensation Device
Available : Backorder
Add to cart
Vocia DS-10
The DS-10 is a desktop networked paging station for use in Vocia® systems. The DS-10 features embedded DSP and on-board memory to support standard and advanced public address functionalities. The DS-10can store 999 user-configurable page codes. Additionally, all device-specific configuration...
BrandBiamp Product TypeDesktop Paging Station
Available : Backorder
Add to cart
Vocia DS-4
The DS-4 is a desktop networked paging station for use in Vocia® systems. The DS-4 features embedded DSP and on-board memory to support standard and advanced public address functionalities. The DS-4 can store four user-configurable page codes. Additionally, all device-specific configuration...
BrandBiamp Product TypeDesktop Paging Station
Available : Backorder
Add to cart
Vocia ELD-1
The Vocia® ELD-1 is a networked safety device for use with a Vocia amplifier (e.g. VA-8600/VA-8600c) and is an integral part of standard-compliant voice evacuation and mass notification systems. The ELD-1 tests and reports speaker line integrity between itself and the Vocia amplifier. The device...
BrandBiamp Product TypeEnd of Line Device
Available : Backorder
Add to cart
Vocia EWS-10
The EWS-10 is the emergency wall-mounted networked paging station certified for use in an EN 54-16 compliant life safety system. It features all the same configurable page codes, memory, and features as the WS-10 paging station. Features Auxiliary port allows the use of an external 24V...
BrandBiamp Product TypeEmergency Wall Paging Station
Available : Backorder
Add to cart
Vocia EWS-4
The EWS-4 is a wall-mounted networked paging station for use in Vocia systems. The EWS-4 features embedded DSP and on-board memory to support standard and advanced public address functionalities. The EWS-4 can store four user-configurable page codes. Additionally, all device-specific...
BrandBiamp Product TypeEmergency Wall Paging Station
Available : Backorder
Add to cart
Vocia GPIO-1
The GPIO-1 provides 16 general purpose inputs and outputs to control various aspects of a Vocia system. The GPIO-1 is a monitored device and can be used with an LSI-16e in life safety applications where more logic inputs or outputs are required. The GPIO-1 has dual powering from PoE Ethernet...
BrandBiamp Product TypeGeneral Purpose I/O Device
Available : Backorder
Add to cart
Vocia WS-10
The WS-10 is a wall-mounted networked paging station for use in Vocia® systems. The WS-10 features embedded DSP and on-board memory to support standard and advanced public address functionalities. The WS-10 can store 999 user-configurable page codes. Additionally, all device-specific...
BrandBiamp Product TypeWall Paging Station
Available : Backorder
Add to cart
Show another 3 products
Product filters
Brand
Product Type