Audio Signal Management

102MX
The 102MX is a high-performance 2-channel stereo audio mixer for line level and mic level audio signals. It mixes one line level input with either a microphone or a second line level input and produces a mixed audio output signal. Features S/N Ratio - 69dB Level (Gain) Control - Line 1 (or...
BrandKramer Product TypeStereo Audio Mixer
21508 MSRP
Available : Backorder
Add to Project Add to cart
102XL
The 102xl is a high-performance 2-channel mono audio mixer for balanced line level and mic level mono audio signals. The unit mixes two mono inputs and produces a mixed audio output signal. Features S/N Ratio - 91.5dB (line level), 62.5dB (mic level) Line or Mic Level - Input selectable...
BrandKramer Product TypeBalanced Mono Audio Mixer
35237 MSRP
Available : Backorder
Add to Project Add to cart
DPA-102PM
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. Atlas DPA amplifiers can be used right out of the box as traditional power amplifiers requiring no...
BrandAtlas IED Product TypePower Amplifier
60115 MSRP
Available : Backorder
Add to Project Add to cart
2211036-02
Extend Line level Stereo Audio signals over Category 5/5e/6 cable up to 2000 feet. 2211036-02 – a set of devices for transmitting a stereo audio signal over twisted pair cable, including a transmitter and receiver. The devices allow you to transmit stereo audio over a standard category...
BrandtvONE Product TypeAudio Extender
15515 MSRP
Available : Backorder
Add to Project Add to cart
900N
The 900N is a high−performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 10 watts RMS power per channel into a 4Ω load. Features High Efficiency — Class D operation. S/N Ratio — 55dB. Controls —...
BrandKramer Product TypeStereo Power Amplifier
21051 MSRP
Available : Backorder
Add to Project Add to cart
900XL
The 900xl is a high−performance power amplifier for line level stereo audio signals. The unit accepts unbalanced audio signals on either of two RCA or 3.5mm connectors and delivers a speaker output of 10 watts RMS per channel into a 4Ω load. Features High Efficiency — Class D...
BrandKramer Product TypeStereo Power Amplifier
31576 MSRP
Available : Backorder
Add to Project Add to cart
907
The 907 is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and delivers 40 watts per channel into an 8Ω load. Features High Efficiency — Class D operation. Controls — Volume...
BrandKramer Product TypeStereo Power Amplifier
47593 MSRP
Available : Backorder
Add to Project Add to cart
907XL
The 907xl is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an unbalanced stereo signal on RCA connectors. It delivers 40 watts per channel into an 8Ω load. Features High Efficiency...
BrandKramer Product TypeStereo Power Amplifier/Mixer
44390 MSRP
Available : Backorder
Add to Project Add to cart
A 100
A100 2-channel power amplifiers: 100W rated power per channel at 4Ω.  Screw terminal speaker connectors and balanced Phoenix input connectors.  Ultra slim body, fan cooling system, bridge mode selector.
BrandAMC Product TypePower Amplifier
26800 MSRP
Available : Backorder
Add to Project Add to cart
A 200
A200 2-channel power amplifiers: 200W rated power per channel at 4Ω.  Screw terminal speaker connectors and balanced Phoenix input connectors.  Ultra slim body, fan cooling system, bridge mode selector
BrandAMC Product TypePower Amplifier
29600 MSRP
Available : Backorder
Add to Project Add to cart
A15BT
Bridging transformer matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels (Male XLR to female XLR). Features 33 kOhm primary: 600 or 7500 ohm secondary may be used in reverse Balanced connections easily switchable to unbalanced Slender...
BrandShure Product TypeBridging Transformer
Available : Backorder
Add to cart
A15HP
Balanced XLR in-line high pass filter that reduces low frequencies below 100 Hz. Features Rolls Off Low-Audio Frequencies Reduces 60 Hz Electrical Hum
BrandShure Product TypeIn-Line High Pass Filter
Available : Backorder
Add to cart
A15PRS
Switchable phase reverser reverses the polarity of a balanced audio signal, corrects polarity reversal from wiring errors, and reduces comb filtering. Features Reverses polarity of pins 2 and 3 of a balanced line Slender, in-line XLR (F) to XLR (M) configuration may be used in reverse...
BrandShure Product TypeSwitchable Phase Reverser
Available : Backorder
Add to cart
A15TG
Battery-powered 700 Hz tone generator that troubleshoots audio systems by checking microphone lines for correct patching and detecting unusual noise. Features The A15TG includes a recessed On-Off switch and a three-pin XLR audio connector Removable end cap allows for easy battery...
BrandShure Product TypeTone Generator
Available : Backorder
Add to cart
A2-7302
Provides 8-In/8-Out AES3 Stereo Channels on XLRs from CM-AUD-8IN-8OUT
BrandtvONE Product TypeAudio Format Converter
Available : Backorder
Add to cart
A2-7322
Provides 8-In/8-Out Analog Stereo Channels (Bal or Unbal) on Terminals from CM-AUD-8IN-8OUT.
BrandtvONE Product TypeAudio Format Converter
2,90505 MSRP
Available : Backorder
Add to Project Add to cart
A2-7342
Provides 4-In/4-Out Analog Stereo Channels on XLRs from CM-AUD-8IN-8OUT
BrandtvONE Product TypeAudio Format Converter
1,88855 MSRP
Available : Backorder
Add to Project Add to cart
A85F
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder. Features Provides 24 dB of gain May be used in reverse XLR and 1/4" connectors
BrandShure Product TypeLine Matching Transformer
Available : Backorder
Add to cart
A95U
Reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone cables with either low- or high-impedance microphones. Features The transformer permits use of very long microphone cables with either...
BrandShure Product TypeLine Matching Transformer
Available : Backorder
Add to cart
A95UF
Line matching transformer connects a balanced low-impedance microphone to an unbalanced high-impedance input. The transformer prevents high-frequency loss, level loss, and hum or noise pickup associated with the use of high-impedance equipment. Features The transformer permits use of...
BrandShure Product TypeLine Matching Transformer
Available : Backorder
Add to cart
Show another 20 products
Product filters
Brand
Product Type