Sign in
Categories
Services
0

Audio Transformers & Isolators

A15BT Bridging Transformer, XLR (F) to XLR (M) configuration
A15BT
Bridging transformer matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels (Male XLR to female XLR). Features 33 kOhm primary: 600 or 7500 ohm secondary may be used in reverse Balanced connections easily switchable to unbalanced Slender...
BrandShure Product TypeBridging Transformer
Available : Backorder
Add to cart
A15HP In-Line High Pass Filter, Balanced XLR
A15HP
Balanced XLR in-line high pass filter that reduces low frequencies below 100 Hz. Features Rolls Off Low-Audio Frequencies Reduces 60 Hz Electrical Hum
BrandShure Product TypeIn-Line High Pass Filter
Available : Backorder
Add to cart
A15PRS Switchable Phase Reverser, XLR (F) to XLR (M) configuration
A15PRS
Switchable phase reverser reverses the polarity of a balanced audio signal, corrects polarity reversal from wiring errors, and reduces comb filtering. Features Reverses polarity of pins 2 and 3 of a balanced line Slender, in-line XLR (F) to XLR (M) configuration may be used in reverse...
BrandShure Product TypeSwitchable Phase Reverser
Available : Backorder
Add to cart
A15TG Tone Generator, 3-Pin XLR Connector
A15TG
Battery-powered 700 Hz tone generator that troubleshoots audio systems by checking microphone lines for correct patching and detecting unusual noise. Features The A15TG includes a recessed On-Off switch and a three-pin XLR audio connector Removable end cap allows for easy battery...
BrandShure Product TypeTone Generator
Available : Backorder
Add to cart
A85F Line Matching Transformer, XLR
A85F
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder. Features Provides 24 dB of gain May be used in reverse XLR and 1/4" connectors
BrandShure Product TypeLine Matching Transformer
Available : Backorder
Add to cart
A95U Line Matching Transformer, 1.9cm Dia & 8.9cm Length, XLR Connector
A95U
Reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone cables with either low- or high-impedance microphones. Features The transformer permits use of very long microphone cables with either...
BrandShure Product TypeLine Matching Transformer
Available : Backorder
Add to cart
A95UF Line Matching Transformer, 1.9cm Dia & 8.9cm Length, XLR Connector
A95UF
Line matching transformer connects a balanced low-impedance microphone to an unbalanced high-impedance input. The transformer prevents high-frequency loss, level loss, and hum or noise pickup associated with the use of high-impedance equipment. Features The transformer permits use of...
BrandShure Product TypeLine Matching Transformer
Available : Backorder
Add to cart
A96F Line Matching Transformer, 1.9cm Dia & 8.9cm Length, XLR Connector
A96F
This transformer connects microphones with an XLR-type connector to the 3.5 mm (1/8 in.) inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the dc bias typically found in camcorder...
BrandShure Product TypeLine Matching Transformer
Available : Backorder
Add to cart
Categories
Show all
Product filters
Brand (1)
Product Type
Reset